WakeTrades

The 33 tools it listed

"Read only" and "Changes data" are the server's own marks. Underlined parameters are required.

1. backtest_leaderRead only

   Backtest a trader

   What copying one Hyperliquid trader would have done over the last 30 or 90 days, at an exposure level (prudent, equilibre or risque; not advanced) and a starting balance (USDC, default 5,000): returnPct, pnlUsd, maxDrawdownPct (worst drop from a peak, in % of the starting balance), feesUsd, ruined, trades (leader, copied, skipped by reason), coverage (truncated: true when Hyperliquid no longer has the oldest fills), assumptions and disclaimer. Same method as the Simulated Copy column of the Monthly Report, at the level's full size for this one trader, with the trader's fill prices plus our measured copy delay cost. A simulation on past data, not a promise. Limits: 5 per 24 hours during the free trial, 20 with a paid plan; the trader's data is kept 1 hour. Errors: backtest_limit, backtest_busy (retry after 60 seconds), unknown_leader.

   leader level balance days

2. close_allChanges data

   Close every copy

   Closes every copied position at market, then pauses copying. Positions opened outside WakeTrades are not touched.

   idempotency_key

3. close_losingChanges data

   Close losing copies

   Closes at market every copied position currently in loss; the others keep running. One of the actions offered by a drawdown alert.

4. close_positionChanges data

   Close one copy

   Closes one copied position at market.

   coin idempotency_key

5. confirm_trading_key

   Accept the Terms and confirm the key

   accept_terms: true accepts https://waketrades.com/terms on behalf of the wallet owner. Retry after 10 seconds on agent_not_registered_yet. Starts copying and the free trial if a webhook or Telegram is linked.

   accept_terms

6. emergency_stopChanges data

   Emergency stop

   In one call: closes every copied position at market and pauses copying. It does not revoke the trading key (only the wallet can, on Hyperliquid › API); resume_copying restarts copying.

   idempotency_key

7. finish_sign_in

   Finish sign-in

   Sends the signed message. Returns session_token: valid until your plan or free trial ends (paying extends it, no new sign-in needed), 6 months at most, 7 days before the trial starts. revoke_all_sessions ends it. The first sign-in of a wallet creates its WakeTrades account.

   address nonce message signature

8. get_accountRead only

   Account and copy status

   Account, copy state, open positions, Hyperliquid balance and network, and copiesOnHold { held, reasons, coins }: held is true when new copies would not open now. Reasons: not_activated (sign-up not finished), paused, trial_expired, plan_expired, key_invalid (trading key expired or revoked: sign a new one), platform_paused, no_leaders, no_margin, not_unified (prudent, equilibre, risque: switch_to_unified_account), manual_positions (positions opened outside WakeTrades, listed in coins: close them, or the account owner allows copies anyway from the dashboard or Telegram), xyz_not_unified (advanced on a standard account: only the xyz markets are held, held stays false).

9. get_journalRead only

   Recent events

   Recent copy events (the same as webhook alerts).

   n

10. get_leaderRead only

    A Hyperliquid trader's card

    Equity, open positions and statistics of a Hyperliquid address you could copy: over 30 days, and over 90 days in stats.d90 (with pnlUsd and pnlPct, perps only).

    address

11. get_leader_positionsRead only

    A trader's open positions now

    A Hyperliquid trader's current open positions: coin, side, sizeUsd, entryPx, markPx, leverage, pnl (unrealized), liquidationPx, openedAt or openedBefore. Use it before choosing a suggested trader: the Monthly Report figures are month-end and a trader can hold a large losing position now. Positions already open when you start copying are never copied; notCopied: true would mark a market WakeTrades does not copy. Also orders: the trader's open orders (kind limit, sl or tp; coin, side, reduceOnly, wholePosition, value, px = trigger price for sl / tp, tp and sl = trigger prices of the take profit and stop loss attached to that order or null, placedAt), to see the prices they are waiting for. Read from Hyperliquid, kept 60 seconds.

    address

12. get_levelsRead only

    The four exposure levels

    Definitions of the four exposure levels (prudent, equilibre, risque, advanced): size of your copies, leaders, exposure cap, drawdown alerts, plans, minPracticalBalanceUsd. With equity (USDC) or a session_token (your Hyperliquid balance): recommendedLevel, the most prudent of prudent, equilibre, risque whose minimum balance the equity covers (1,100 / 550 / 300 USDC), with recommendationNote; under every minimum, risque with belowAllMinimums: true (copies under Hyperliquid's minimum order open at 11 USDC; risque stays closest to the leaders' proportions). advanced is never recommended. No session needed.

    equity

13. get_offerRead only

    Prices

    Plan prices in USDC for 1, 3 or 6 months, the struck regular prices, and the founder rule: 50% off for as long as you renew before your plan ends (lost if a paid plan lapses), first members only, can close without notice. bestValue = 6m.

14. get_ordersRead only

    Copy orders

    Recent copy orders, including skipped trades and why.

    n

15. get_positionsRead only

    Copied positions

    Copied positions with their stop and take profit, and openedAt (ms) for their age.

16. get_reportRead only

    Monthly report

    The monthly report: up to 5 Hyperliquid traders per exposure level (prudent, equilibre, risque; advanced picks from any list), with what a copy at that level would have made and lost over 90 days. Paid plan (access: full): everything, names and addresses included. Free trial (access: preview): rank, type, the copy figures, the trader's 90-day and 6-month returns, win rate (rounded down) and profit factor; no names or addresses. yourCopy: the top 3 of each level copied together, by balance (simulated). market: the month's market. texts: the month's notes (preview: no names, addresses or per-leader notes). annex: the biggest returns and why they are not listed (preview: up to 3 reasons, no address). yourResults: this wallet's real figures for the month ({ ready: false } until a month of copying is closed). Published on the 1st of each month for the month just ended.

    level month

17. get_startedRead only

    How WakeTrades works for agents

    The full flow for an AI agent, the rules that apply, and links to the docs and the OpenAPI reference.

18. helloRead only

    Hello

    What WakeTrades is in one sentence, three quick-start steps with their endpoints, the Hyperliquid network, whether copying is on for everyone (on, pause or halt), and links to the docs, OpenAPI, llms.txt, MCP, agent skills and Terms. No session needed.

19. link_webhook

    Link a webhook alert channel

    HTTPS endpoint (port 443, public host) that receives signed copy alerts; it must answer 2xx to a test event. Returns the signing secret once. Starts the free trial if the trading key is already confirmed.

    url

20. pause_copying

    Pause copying

    No new copies; open copies stay managed (stops kept, closed when the leader closes).

    idempotency_key

21. prepare_paymentRead only

    Prepare a plan payment

    Returns the payment action and the EIP-712 typedData to sign for a plan (exact price, WakeTrades receiver): usdSend from your free perps USDC, or sendAsset from your spot USDC when the perps balance is short (unified account). The free trial must have started. Before signing, check typedData (not only action): primaryType HyperliquidTransaction:UsdSend or HyperliquidTransaction:SendAsset, message.destination = receiver and message.amount = your plan's price, both from GET https://waketrades.com/api/v1/subscription; never sign a Withdraw.

    plan

22. prepare_trading_key

    Prepare the trading key approval

    Creates (or returns) the WakeTrades trading key for this account and returns the approveAgent action and the EIP-712 typedData to sign with the wallet. Hyperliquid refuses keys on an account without a deposit. Before signing, check that typedData's primaryType is HyperliquidTransaction:ApproveAgent; never sign a Withdraw.

23. resume_copying

    Resume copying

    Resumes copying if the trial or plan is valid and an alert channel is linked.

    idempotency_key

24. revoke_all_sessionsChanges data

    Sign out of all sessions

    Signs out every session of this wallet: browsers, AI agents and links opened from the Telegram bot, this session included. Use it if a session_token may have leaked. Copying and open copies are not affected; sign in again to continue.

25. set_advanced

    Advanced settings

    Advanced level only (every plan and the free trial). Every field is optional; missing fields keep their value. copy_mode: proportional (default; copies follow the leader's size) or fixed (a margin per position, whatever the leader's size, Unified Account only; not_unified skip otherwise), one at a time; settings of the other mode stay saved, without effect, and open copies keep the rule they opened with. Fixed mode: fixed_margin_pct (margin per position, in % of equity at entry), fixed_leverage (capped at the market's maximum), fixed_positions (positions at once; fixed_positions × fixed_margin_pct can't exceed 100). Value of a position = margin × leverage. Adds are ignored, reductions and closes followed; when every slot is taken the trade is skipped and not picked up later. Isolated-only markets are skipped. tp_sl_basis: pnl (default) or price, for tp1_pct, tp2_pct, sl_pct: pnl = PnL % of the copy, leverage included; price = % of price from the copy's average price (0.1 to 90). accoun

    size_pct max_exposure_x max_open_positions alerts_pct auto_stop_pct follow_adds copy_leader_tpsl markets min_market_leverage max_leverage sides copy_stop_pct daily_loss_pct tp1_pct tp1_close_pct tp2_pct tp2_close_pct sl_pct sl_close_pct break_even_after_tp1 copy_mode fixed_margin_pct fixed_leverage fixed_positions tp_sl_basis account_tp_pct account_tp_close_pct

26. set_copy_settings

    Choose traders and exposure level

    During sign-up, call it first with the level only, then with leaders (suggest_leader proposes one). Leaders to copy (followed in order: up to 3 at prudent, equilibre and risque, up to 5 at advanced; the others stay saved) and the exposure level. Every level copies your leaders' positions scaled to your balance, adds and reductions included, with their stop loss and take profit and no stop of its own; the size is set per leader, so following fewer leaders lowers your exposure. prudent: 25% of your leaders' size across 3 leaders, total exposure up to 3x your balance, drawdown alerts at -6% and -8%. equilibre: 50%, up to 10x, alerts -15% and -20%. risque: 100%, up to 20x, alerts -30% and -50%, 2 leaders strongly recommended (not required), risk_ack: true required above 10,000 USDC. advanced: every plan and the free trial, starts with risque's settings; change them with set_advanced. Alerts never close anything on their own. At prudent, equilibre and risque, new copies need a Hyperliquid U

    leaders level risk_ack dry_run

27. set_order_mode

    Market or limit entries

    How copies enter. limit (default for new accounts): a post-only order at the leader's price; unfilled after 1 minute, it is cancelled and the copy opens at market unless the price is more than 1% from the leader's entry; if the leader exits first, nothing is copied (limit_missed event). market: at market right away, skipped if the price is more than 1% from the leader's entry. Orders already waiting keep their mode.

    mode

28. start_sign_in

    Start sign-in

    Returns a nonce and the exact message to sign with the wallet (EIP-191 personal_sign). Valid 10 minutes.

    address

29. submit_payment

    Pay a plan

    Relays the signed payment (usdSend or sendAsset) to Hyperliquid and applies the plan as soon as Hyperliquid accepts it. dry_run: true runs every check (action, plan and amount, receiver, token, signer, age, balance of the signed source) and answers { dryRun, ok, plan, amount, from, source, wouldRelay } or the error the real call would give, without relaying or applying anything; then send the same action without dry_run within its 10 minutes. Before signing, check typedData (not only action): primaryType HyperliquidTransaction:UsdSend or HyperliquidTransaction:SendAsset, message.destination = receiver and message.amount = your plan's price, both from GET https://waketrades.com/api/v1/subscription; never sign a Withdraw.

    plan action signature dry_run idempotency_key

30. submit_trading_key

    Submit the signed trading key approval

    Relays the signed approveAgent to Hyperliquid. On hyperliquid_refused, reason no_deposit means deposit USDC first; too_many_agents means revoke an API wallet on Hyperliquid.

    action signature idempotency_key

31. suggest_leaderRead only

    Suggested traders for a level

    Traders of our latest Monthly Report for an exposure level (advanced uses risque's list). Rule: each more prudent level's suggestion is set aside first (prudent, then equilibre); then, among the level's #3 to #5 not set aside, the one who opened the most positions in the 30 days before the report is suggested (a tie goes to the better rank), never #1 or #2; if #3 to #5 were all set aside, the most active of them anyway. One suggestion per level, for every account: three traders of the report in all; the full lists are in get_report with a paid plan. risque strongly recommends 2 leaders: choose the second one yourself. The answer's top-level fields are the suggestion and suggestions repeats it: address, rank, winRatePct, profitFactor, tradesPerMonth, medianHoldHours, note, liveCheck. Report figures are month-end: before choosing, check the trader's current positions with get_leader_positions. Then pass the address to set_copy_settings; changeable any time. Error no_suggestion: no report

    level

32. switch_to_unified_account

    Switch to a Unified Account

    Switches the Hyperliquid account to a Unified Account with the trading key (Hyperliquid agentSetAbstraction): no wallet signature. Required for new copies at prudent, equilibre and risque, and for xyz markets at every level. Call it right after confirm_trading_key. Returns { mode, unified }; an account already unified is left as is. Errors: key_required (confirm the trading key first), switch_failed (switch it in your Hyperliquid settings).

    idempotency_key

33. unlink_webhookChanges data

    Remove the webhook

    Removes the webhook. Copying pauses if no alert channel is left; open copies stay managed.